Riegl VZ-1000 3D Laser Scanner

Riegl VZ-1000 3D Laser Scanner
Condition : Demo unit, unopened and ready to work
Come with warranty 12 month
Included in Sale :
– Riegl VZ-1000 3D Scanner
– Flight case
– Vehicle/rack mount (vehicle not included)
– 3 x Rack Mount Screws
– Black External Battery
– External Battery Charger
– Battery Power Supply Cable
– 12v Power Supply Cable 1m
– 8 x Scanner Targets – Cylinder
– Blanking Cap
– Cap to 3/8 thread
– Cap to Thread Mount

High Accuracy Performance
The 3D Terrestrial Laser Scanner RIEGL VZ-400 provides scan data acquisition with 5 mm accuracy / 3 mm repeatability, a measurement range of up to 600 m, and an efficient measurement rate of up to 122,000 measurements/sec. The fully portable, rugged and robust instrument offers a wide field of view of 100° vertical and 360° horizontal, and uses an invisible laser beam for eye safe operation in Laser Class 1

Camera Option
A high-precision mount enables the integration of an optional DSLR camera. The camera can be easily integrated into the mount by means of two screws. Precise position and orientation of the camera is enabled by three supporting points. Power supply and a USB 2.0 interface are provided via the scanner directly.
The combination of scanner, software, and camera results in photorealistic 3D data, exact iden-tification of details, position and distance measurements, as well as a depiction of any virtual
point of view.

Waveform Data Output Option
The digitized echo signals, also known as wave-form data, acquired by the RIEGL VZ-400 are the basis for waveform analysis. This data is provided by the optionally available waveform data output and accessible via the associated RIEGL software library RiWAVELib for investigations and research on multi target situations based on the digital waveform data samples of the target echoes.

Compatible Software Packages
The RIEGL VZ-400 is compatible with the RIEGL software package RiSCAN PRO for terrestrial laser scanning, RIEGL‘s interface library RiVLib, as well as the workflow-optimizing software packages, e.g. RiMINING. Combined with the one-touch workflow of the scanner, RIEGL‘s ultimate 3D scene capture solution, RiSOLVE, enables fully automatic registration and colorization of scan data.

Supported Registration Methods
Direct Geo-Referencing

• Integrated GPS receiver (L1) connected
• External high-end RTK GNSS receiver connected
• Integrated compass, accuracy typ. 1° (one sigma value, available for vertical scanner setup position)
• On-board inclination sensors (tilt range ±10°, accuracy typ. ±0.008°)

GNSS Traversing

• GNSS position
• On-board inclination sensors
• Automatic acquisition of well known remote target (reflector)

Free Stationing

• Fast fine scanning of reflectors for precise determination of scanner position using control points

Backsighting

• Setup on well known point
• On-board inclination sensors
• Precise fine scanning of well known remote target (reflector)

Communication and Interfaces

• LAN port 10/100/1000 MBit/sec within rotating head
• LAN port 10/100 MBit/sec within base
• Integrated WLAN interface with rod antenna
• USB 2.0 for external storage devices (USB flash drives, external HDD)
• USB 2.0 for connecting the optional digital camera
• Connector for GPS antenna
• Two ports for external power supply
• Connector for external GPS synchronization pulse (1PPS)
• Connector for external GNSS receiver

Scan Data Storage

• Internal 32 GBytes flash memory (2 GBytes reserved for the operating system)
• External storage devices (USB flash drives or external hard drives) via USB 2.0 interface